Suitable for all plants. In case of renewing of the cleaning plant, the CIP frame can be supplied separately to be connected to existing tanks.
It’s used to control the concentration level of chemical solutions in water. This is important for the proper dosing and to know that the lines are perfectly rinsed with no acid or alkaline left in the pipes.
CIP RETURN PUMP
The self-priming pump is installed at the end of each cleaning cluster for water and chemical solution recirculation.
SECOND CIP LINE
It’s an indepenent second line, in case you have several utilities and tanks to clean. With this option you can wash two utilities or tanks simultaneously to save time.
DOSING (ALKALINE OR ACID)
Composed of a membrane pump and a pneumatic valve to automatically add acid or alkaline to the tanks in order to have the right concentration.
To control and adjust the right concentration of acid and alkaline. Composed of recirculation pumps and conductivity/temperature transmitter and control (available for Sanomidi automatic and Sanomaxi).
It is possible to select a frequency inverter for installation in the electrical panel to start and stop the feeding pump with a speed ramp, and to select the running speed from the operator panel.
A thermal sterilisation can be added (optional). The thermal sterilisation valve ensures that a closed loop is obtained during the thermal sterilisation cycle, designed to kill bacteria resistant up to 85° C- 90° C / 185° F - 194° F.
AUTOMATION FOR SAFE CLEANING
Our CIPs are available with automatic control of all parameters to eliminate the risk of mixing CIP chemicals. Control and monitoring of all valves ensures no chemical mixing of liquids. The local operator panel - equipped with unique SANOVO software - helps the operator during the cleaning process by displaying operation status, warning and alarms. Data recording and logging is optional if adding the SCADA system.
All the functions are automatically controlled by a PLC.